Kegs Tips for The Average Joe

Aug 4, 2017 by

Beer Keg Taps-A Guide The beer keg is normally seen in picnics or parties notably with your family and friends. Individuals who feel really thirsty need to drink a lot and so keg will save you a bit of cash as it is affordable. A keg faucet is a device that facilitates the discharge of beer in your drinking cup from the keg. It is not a hard thing to do but you must take care as you may waste the beer if you do not know how to do it right. Foam may splash on your face or all around you if you do it wrong. You might see people pour some beer readily but it is not as easy as it looks. The main purpose of the keg tap is to release the beer. A lever is used, and by pressing and pulling it, the beer is released. It works by releasing the pressure which then pushes the beer up and into the container or glass. The keg tap works just like a switch and may be an open/close or an on/off switch. When trying to connect the keg to the faucet, place the keg tap right in front of you and set it in a steady position for some time to minimize the froth it makes when pouring. Transporting the keg builds foam up especially when there’s lots of motion. Give it time to remain for some time and put the keg where you intend to serve the beer to lessen the foam. Remove the cap or seal as it is more difficult to tap with these on it. However, the experts do not remove the seal or cap because they are good at it and will not put the beer at risk as you will.
Questions About Taps You Must Know the Answers To
Connect the tap and the line with the hole that is on top of the keg. There are a few open slits and a ball bearing when you connect the tap to the keg. The ball bearing works as a stopper and also the slits hold the tap in place. Before you need to do anything, make sure to push down the ball bearing. You are going to require only a little power to shove it down so that the beer may flow. Slide the tap in a clockwise manner while exerting some pressure downward. If you do not have that downward pressure, the pressure will build up in the keg and will push the tap out of the way. Hence, you need to keep the downward pressure or keep pushing it down as you keep the tap in the right place. When you turn the tap you lock it and afterwards, you can pour some cups of beer to discard any foam.Case Study: My Experience With Taps

Related Posts

Tags

Share This

468 ad